Is this the page you wanted to show Mike? try copy/paste this link!
http://www.woodjoytools.com/gall-scrape.html
YF Serge
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Elegant/Effective Tool Brace Detailing http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=6441 |
Page 1 of 1 |
| Author: | Miketobey [ Mon May 01, 2006 1:39 am ] |
| Post subject: | |
I'm going to try to upload a picture and contact. This spokeshave type scraper is just a delight to use. I got 2 blades with mine-one for hook,one unhooked for Spruce and other softwoods. Glenn is a great craftsman and a very pleasant fellow. Wrong type file. google "woodjoy tools"-standard scraper- there is just enough arch in the handles that cleaning up a small troublesome flat spot is possible too. Best regards,MT |
|
| Author: | Serge Poirier [ Mon May 01, 2006 8:28 am ] |
| Post subject: | |
Is this the page you wanted to show Mike? try copy/paste this link! http://www.woodjoytools.com/gall-scrape.html YF Serge
|
|
| Author: | peterm [ Mon May 01, 2006 8:41 am ] |
| Post subject: | |
How about this: 
Click here |
|
| Author: | Serge Poirier [ Mon May 01, 2006 9:08 am ] |
| Post subject: | |
WTG Peter!
|
|
| Author: | Miketobey [ Mon May 01, 2006 9:38 am ] |
| Post subject: | |
Thanks-I don't know how to do links. MT |
|
| Author: | Don A [ Mon May 01, 2006 11:18 am ] |
| Post subject: | |
To post a link, click on the globe and chain above the post box. Type in the name and then at the next query paste in the actual link. Hope this is clear and helps. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|